2.0-litre Pinto Rev. Limiter REMINDER

Drivers are reminded that the installation and use of the BriSCA F2 specification rev. limiter on the 2.0-litre Ford Pinto engine becomes MANDATORY from 1st March 2019. This requirement remains as detailed in technical bulletins published on the BriSCA F2 website and social media platforms in October, November and December 2018, and again in February 2019, all of which state:

“Use of the standard Rev. Limiter on ALL 2.0-litre Ford Pinto Engines raced in BriSCA F2 will be mandatory from 1st March 2019.”

BriSCA F2 has not issued any contrary information, and drivers should ignore any such conflicting rumours.

Cars without a mandatory rev. limiter fitted and working will NOT be permitted to race

Rev. limiters are available for immediate purchase and despatch through the BriSCA F2 secretary’s office, as follows:

  • Limiters MUST be purchased directly from BriSCA F2, and ordered from the BriSCA F2 office.
  • The price of a rev. limiter for a 2-litre Pinto engine is £150 (inclusive of VAT).
  • Payment can be made by any of the following methods:
    • Post - Cheques should be made payable to “BriSCA F2 Ltd” and sent to BriSCA F2, Nylands, Charlton Horethorne, Sherborne, Dorset, DT9 4NG.
    • PayPal - sales@briscaf2.com
    • Card (over the phone) - 01963 220028

 

All race winners/results listed on www.briscaf2.com are subject to final checking by the Official Grader | Software © Nexus | Site by Chris Frankum | © 2019 BriSCA F2

Logos